Banner

新闻详情

Home > News > Content

How to deal with constant temperature and humidity machine can not meet the humidity requirements

How to deal withConstant temperature and humidity machineNot up to humidity requirements




"Summary":

It is well known that the temperature system of the thermostat has two subsystems, namely, humidification and dehumidification of the two subsystems, and humidification generally uses steam humidification, simply speaking, the low pressure steam directly into the box for humidification.   Humidification it in this way is fast, humidification control is more sensitive, especially when cooling can be very good to achieve forced humidification. And there are two kinds of dehumidification of constant temperature and humidity machine, mechanical refrigeration dehumidification and drying dehumidification. The so-called dehumidification principle of mechanical refrigeration is to cool the air below the dew point temperature, so that water vapor larger than the saturated moisture content condensation precipitation, thus reducing the humidity. The dryer uses an air pump.


It is well known that the temperature system of the thermostat has two subsystems, namely, humidification and dehumidification of the two subsystems, and humidification generally uses steam humidification, simply speaking, the low pressure steam directly into the box for humidification. Humidification it in this way is fast, humidification control is more sensitive, especially when cooling can be very good to achieve forced humidification.

 

And there are two kinds of dehumidification of constant temperature and humidity machine, mechanical refrigeration dehumidification and drying dehumidification. The so-called dehumidification principle of mechanical refrigeration is to cool the air below the dew point temperature, so that water vapor larger than the saturated moisture content condensation precipitation, thus reducing the humidity. The dryer is the use of air pump to pull out the gas in the test box, and the dry air injection, while the wet air into recyclable drying for drying, after drying and into the test box, so repeated circulation for dehumidification.

 

The humidification system of the constant temperature and humidity machine is roughly the same as that of the heating system; It is the heater heating water into the steam process; The purpose of Humidification is completed. The moisture reduction system is also done by the refrigeration system, the evaporator is placed inside the equipment, inside the high-humidity gas to meet the cold object condensed into a liquid, so repeated box of high-humidity gas will be very few, so as to achieve the goal of moisture reduction.